| Free
14T967DC Serger/Overlock Workbook |
|
|
This workbook has been created as a tool for learning the various
stitch types on the Quantumlock® 14T967DC serger/overlock machine.
It is very comprehensive and totals 231 pages. For this reason, it
has been divided into fourteen individual sections which can be
downloaded and printed separately. Each section focuses on a
particular stitch type covering machine set-up and threading
directions, and contains photos and definitions on how and where the
stitch can be used, as well as suggestions for successful stitch
formation. We hope the workbook will enable you to use your
Quantumlock® 14T967DC to its full capacity.
In order to view and print the workbook sections,
you will need the Adobe® Reader® — free software for viewing and
printing Portable Document Format (PDF) files.
|
 Double
Chain Stitch (12 pages)
1-needle, 2-thread straight stitch is used for construction or decorative
stitching. Seams also can be sewn at desired distance from edge of fabric
by disengaging the right looper and movable knife.
 Two-thread
Wrapped Edge Overlock (Narrow & Wide) (15 Pages)
1-needle, 2-thread stitch is used for seaming lightweight or stretch
fabrics. Is is also ideal for rolled and blind hemming. A 4 mm and 6 mm
overlock seam width can be obtained by changing the needle position
 Two-thread
Overedge (Narrow & Wide) (16 Pages)
1-needle, 2-thread stitch is used for overedging common fabrics. It is
also ideal for flatlock (butted or lapped) seams and blind hemming. A 4 mm
and 6 mm overedge seam width can be obtained by changing the needle
position.
 Three-thread
Overlock (Narrow, Wide & Wide with Decorative Threads) (29 Pages)
1-needle, 3-thread stitch is used for overedging and seaming on common
fabrics. A 4 mm and 6 mm overlock seam width can be obtained by changing
the needle position.
 Three-thread
Flatlock (Narrow & Wide) (21 Pages)
1-needle, 3-thread stitch is used for butted or lapped seams and
ornamental stitching with decorative thread. Also, a 4 mm and 6 mm
flatlock width can be obtained by changing the needle position.
 Three-thread
Ultra-Stretch Mock Safety Stitch (13 Pages)
2-needle, 3-thread stitch that is ideal for lightweight, extremely
stretchy fabrics such as tricot and spandex.
 Four-thread
Ultra-Stretch Mock Safety Stitch (16 Pages)
2-needle, 4-thread stitch that is ideal for medium to heavyweight stretch
fabrics such as double knits and swim wear.
 Four-thread
Safety Stitch (15 Pages)
The 4-thread stitch is a safety stitch made up of combined 2-thread
overedge and double chainstitch.
 Five-thread
Safety Stitch - Wide (18 Pages)
The 5-thread stitch is a safety stitch made up of combined 3-thread
overlock and double chainstitch. A wide seam is formed by using left
needle. Overedge and seaming can be done in one operation on non-stretch
fabrics.
 Five
thread Safety Stitch - Narrow (18 Pages)
The 5-thread stitch is a safety stitch made up of combined 3-thread
overlock and double chainstitch. A narrow seam is formed by using right
needle. Overedge and seaming can be done in one operation on non-stretch
fabrics.
 Cover
Stitch - Narrow (13 Pages)
2-needle, 3-thread cover stitch is suitable for hemming stretchy fabrics.
A narrow seam is formed by using left and middle needles.
 Cover
Stitch - Wide (13 Pages)
2-needle, 3-thread cover stitch is suitable for hemming stretchy fabrics.
A wide seam is formed by using left and right needles.
 Triple
Cover Stitch (15 Pages)
3-needle, 4-thread cover stitch is suitable for hemming stretchy fabrics.
 Three-thread
Rolled Hem (14 Pages)
1-needle, 3-thread stitch is used to finish edges of scarves, ruffles,
table linens, etc.
Return
to Operation Basics
|
